Additionally, what changes are necessary for you to be able to use Linux full time?

  • harmonea@kbin.social
    link
    fedilink
    arrow-up
    3
    ·
    edit-2
    1 year ago

    That’s absolutely the worst help forum experience, when you’re asking one question but everyone extrapolates the question they think you REALLY meant to ask and talks down to you about it.

    And of course if you try to steer the conversation back to your actual question, you get painted as the unreasonable one placing all sorts of conditions on the generous free help others are allowed to bestow upon you.

    The less reliance on others Linux requires, the better off it will be for general adoption.

    • richieadler@lemmy.myserv.one
      link
      fedilink
      English
      arrow-up
      1
      ·
      1 year ago

      everyone extrapolates the question they think you REALLY meant to ask and talks down to you about it

      It’s true, but the “X-Y problem” is real.

      The question may be “what’s the best way to do X”, when they actually want to do Y and they concluded, erroneously, that X is the best way to do it. Responders suspect this, so they want to steer the questioner to a best explanation to find out if that’s the case, just to watch the questioner’s tantrum when the immediate answer is not what they expect.

      • harmonea@kbin.social
        link
        fedilink
        arrow-up
        1
        arrow-down
        1
        ·
        edit-2
        1 year ago

        Speaking only for myself, if I want to know the best way to do Y, I ask about how I can do Y. If I’m at the stage where I’ve moved on to asking about how to do X, there’s a reason I want to approach the problem that specific way – personal preference, limitations of my setup, learning a new approach, whatever else – and I’m not there to get into some asinine argument defending my choice, I’m there to find out how to do X.

        So while I’m well aware of the thought process behind it, I will never not find it incredibly disrespectful to disregard the question being asked in order to make snarky little guesses at intent and answer a totally different question.

        • richieadler@lemmy.myserv.one
          link
          fedilink
          English
          arrow-up
          1
          ·
          1 year ago

          This, of course, assumes perfect understanding on your part. That could be a mistake, specially as you are, you know, asking for help.

          • harmonea@kbin.social
            link
            fedilink
            arrow-up
            1
            arrow-down
            1
            ·
            1 year ago

            The standard “come prepared with a good question” is simply not as hard for a savvy user to meet as you’re making it out; certainly it’s far easier than scrying between the lines and derailing the topic on purpose, and it strikes me as arrogant that anyone would trust their own attempts at mind-reading more than the clear words on the page. I’ve got a very good idea why you’re taking this all so personally that you’re replying to it three weeks after any of it was active.

            Well, at least the very fact that you’re taking it personally means it dug deep enough that you’re aware it’s a problem, even if you still have a bit of a journey before you accept it needs a change.

            • richieadler@lemmy.myserv.one
              link
              fedilink
              English
              arrow-up
              1
              ·
              edit-2
              1 year ago

              The standard “come prepared with a good question” is simply not as hard for a savvy user to meet as you’re making it out

              Your mistake is presupposing a savvy user.

              I’ve got a very good idea why you’re taking this all so personally that you’re replying to it three weeks after any of it was active.

              Please enlighten all of us about the procedure granting you telepathy, or shut the fuck up.

    • _cerpin_taxt_@lemmy.world
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      Haha your second paragraph sums it up perfectly. A few folks did share their settings, but they were for completely different printers/hardware haha. Most of the online guides I’ve found are written under the assumption that you’re already a master at the hobby, and it’s strangely spread out in random little nooks of the internet - there’s not really a ton of centralized discussion forums. Maybe the hobby is way smaller than I thought, or maybe I’m just in way over my head, but I fix tech problems for a living - did not expect this to be as much of a challenge. Never buy a 3D printer if you value your sanity and living stress-free. Sorry, I just needed to rant for a minute haha.

      • Statick@programming.dev
        link
        fedilink
        arrow-up
        2
        ·
        1 year ago

        Yeah 3D printers are fussier than I expected. Especially when printing anything involving supports and more specifically… small areas that need supports. I print a lot of stuff for D&D and have just started cutting things up into pieces with blender to print easier, then glue it together

        I will say. My first thought was obviously to ask what what printer, to see if I could send you my profile for you to compare (depending on the soccer you use). Then my second was to ask if you’re having issues and if so, what the issues are.

        Only because sometimes a seemingly large issue could be a very small fix.

        When I first started, I got it working great and then out of no where nothing would stick to the bed. I spent more time than I’d like to admit messing with settings only to realize it was the oils on my hands causing adhesion issues. Some 99% IPA fixed all my issues real quick haha.

        • _cerpin_taxt_@lemmy.world
          link
          fedilink
          arrow-up
          1
          ·
          1 year ago

          That would be awesome! I’ve got an Ender 6 with a Micro Swiss NG extruder. I was printing decently with the stock hardware, but that stock extruder was a nightmare and kept slipping or completely losing grip on filament mid-print, so I upgraded to this extruder. Now I’m just trying to find that perfect spot to where it extrudes but doesn’t grind filament. I’ve been having some really messy prints.

          I just had a feeler gauge arrive in the mail, so I’m about to use that to try leveling the bed more accurately. Everyone says to just use a piece of paper or something, but different paper is different widths haha.

          I do have a PEI bed, so stuff sticks and comes off way easier now, but I would love to check out your slicer settings to get a good baseline! What kind of hardware do you have, and which slicer do you use?

          • Statick@programming.dev
            link
            fedilink
            arrow-up
            1
            ·
            edit-2
            1 year ago

            Sure thing, I have a two Sovol SV06’s, one for a 0.4 nozzle and one for a 0.2 nozzle, and a Bambu Labs X1C.

            The SV06’s took me a few weeks to tweak, especially the one with the 0.2 nozzle.

            Here is my cura profile for the Sovol SV06 with the 0.4 nozzle https://filebin.net/ljh52w2lehipzbms

            Just using that outright probably won’t work. What I would do is load up the default Ender 6 profile that Cura has, and then adjust settings based on mine. For instance. You went from a bowden extruder to a direct drive. So you can probably copy my retraction settings as a baseline and adjust from there. You need far less retraction on direct drive extruders (i.e. 0.2mm-1mm for direct drive vs 5mm-8mm for bowden).

            I would also look up CHEP and Teaching Tech on youtube. They have great videos on bed leveling and everything else related to 3d printing.

      • Rodeo@lemmy.ca
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        Most of the online guides I’ve found are written under the assumption that you’re already a master at the hobby

        I’ve had exactly the opposite experience lol. Most of the stuff out there is dreadfully basic, and if you want detail like scientific comparisons of the strength-weight ratios of different infill patterns, good fuckin luck. Some chum on YouTube will have some half baked experiments and that’s as good as it gets.