I recognize three kinds of comments that have different purposes.

The first kind are doc block comments. These are the ones that appear above functions, classes, class properties, methods. They usually have a distinct syntax with tags, like:

/*
 * A one-line description of this function's job.
 *
 * Extra details that get more specific about how to use this function correctly, if needed.
 *
 * @param {Type} param1
 * @param {Type} param2
 * returns {Type}
 */
function aFunctionThatDoesAThing(param1, param2) {
    // ...
}

The primary thing this is used for is automatic documentation generators. You run a program that scans your codebase, looks for these special comments, and automatically builds a set of documentation that you could, say, publish directly to a website. IDEs can also use them for tooltip popups. Generally, you want to write these like the reader won’t have the actual code to read. Because they might not!

The second kind is standalone comments. They take up one or more lines all to themselves. I look at these like warning signs. When there’s something about the upcoming chunk of code that doesn’t tell the whole story obviously by itself. Perhaps something like:

/* The following code is written in a weird way on purpose.
I tried doing <obvious way>, but it causes a weird bug.
Please do not refactor it, it will break. */

Sometimes it’s tempting to use a standalone comment to explain what dense, hard-to-read code is doing. But ideally, you’d want to shunt it off to a function named what it does instead, with a descriptive doc comment if you can’t cram it all into a short name. Alternatively, rewrite the code to be less confusing. If you literally need the chunk of code to be in its confusing form, because a less confusing way doesn’t exist or doesn’t work, then this kind of comment explaining why is warranted.

The last kind are inline comments. More or less the same use case as above, the only difference being they appear on the same line as code, usually at the very end of the line:

dozen = 12 + 1; // one extra for the baker!

In my opinion, these comments have the least reason to exist. Needing one tends to be a signal of a code smell, where the real answer is just rewriting the code to be clearer. They’re also a bit harder to spot, being shoved at the ends of lines. Especially true if you don’t enforce maximum line length rules in your codebase. But that’s mostly personal preference.

There’s technically a fourth kind of comment: commented-out code. Where you select a chunk of code and convert it to a comment to “soft-delete” it, just in case you may want it later. I highly recommend against this. This is what version control software like Git is for. If you need it again, just roll back to it. Don’t leave it to rot in your codebase taking up space in your editor and being an eyesore.

“tells the user the current time” would be an excellent comment for a clock

I’m not the best at commenting my code, but generally I just try to think of what information I’d want to know if looking at this 10 years from now

Imo comments are best used sparingly, don’t bother commenting something that anyone with a basic understanding of programming would understand straight away by reading the code

Functions should generally be commented with what parameters are and what they’re for, plus what they output

use reqwest::Client;

// create a http client class that all other files can import 
// so as to only create one instance globally 

pub struct HttpClient {
    client: Client,

}
impl HttpClient {
        pub fn new() -> Self {
            HttpClient {
                client: Client::new(),
            }
        }

        pub fn client(&self) -> &Client {
            &self.client

        }

}

Here’s an example where if I were to stumble onto this file 10 years from now, I might think wtf is this looking at it out of context, the comment explains why it exists and what it’s used for

(we’ll ignore the fact I totally didn’t just add this comment because I suck at commenting personal projects)

I often use comments as ways to say, “I know this is cursed, but here’s why the obvious solution won’t work.” Like so:

/**
 * The column on this table is badly named, but
 * renaming it is going to require an audit of our
 * db instances because we used to create them
 * by hand and there are some inconsistencies
 * that referential integrity breaks. This method
 * just does some basic checks and translates the
 * model’s property to be more understandable.
 * See [#27267] for more info.
 */

Edit: to answer your question more directly, the “why not what” advice is more about the intent of whether to write a comment or not in the first place rather than rephrasing the existing “what” style comments. What code is doing should be clear based on names of variables and functions. Why it’s doing that may be unclear, which is why you would write a comment.

Write comments that explain why the code isn’t obvious just by reading it. Why did you do things the long way? What did you need to work around? Why didn’t you do the thing that anyone reading the code would expect you to do?

Also write comments that explain the purpose of the functions you use, in case the names of those functions don’t make it clear on their own.

the “what” is interesting on interfaces or when you generate documentation with some tool like sphinx or javadoc.

the “why” is interesting when you are somewhere inside a class or function and do something in a “strange” way, to work around a quirk in the codebase or something like that, or when you employ optimizations that make the code harder to read or atleast less obvious why somethings are done.

“Why” comments make more sense as application complexity grows.

You also have to consider interaction of the code with other external systems - sometimes external APIs force you to write code in ways you might not otherwise and it’s good to leave a trail for others on your team (and your future self…) about what was going on there.

Not everything needs a comment - knowing when comments add value is the key… “what” vs “why” is usually a good indicator but some code just doesn’t need a comment.

IMO, the most important parts are to document the actual intent of the code. The contract of what is being documented. Sure, it’s only so useful in perfectly written code, but NO code is perfect, and few will come through later with full context already learned.

It makes it sooo mich easier to know what is intended behavior and what is an unchecked edge case or an unexpected problem. If it’s a complicated thing with a lot of fallout, good documentation can save hours of manually lining up consequences and checking through them for sanity.

You might say, “but that’s indication of bad code!”. No. Not really. Consequences easily extend past immediate code doing things as trivial as saving data to the database without filtering, or having a publicly available service. Even perfectly coded things come up with vulnerabilities all the time due to underlying security issues. It’s always great to have an immediate confirmation of what’s supposed to happen whether it’s immediate code or some library with a new quirk in a new version.

My comment game has gotten far better since I started doing live code reviews. Essentially I ask myself, “Would I feel the need to explain this to someone during a code review?” and if the answer is yes I add a comment.

Making up an example on the spot is kinda difficult for me, but I’d look at it this way with a bold statement, you should hope that most code won’t need comments. Let’s exclude documentation blocks that are super ok to be redundant as they should give a nice, consistent, human readable definition of what x thing does (function, constant, enum, etc.) and maybe even how to use it if it’s non-intuitive or there are some quirks with it.
After that, you delve in the actual meat of the code, there are ways to make it more self explanatory like extracting blocks of stuff into functions, even when you don’t think it’ll be used again, to be used with care though, as not to make a million useless functions, better is to structure your code so that an API is put into place, enabling you to write code that naturally comes out high level enough to be understood just by reading, this thing is very difficult for me to pinpoint though, because we think of high level code as abstractions, something that turns the code you write from describing the what rather than the how, but really, it’s a matter of scope, a print statement is high level if the task is to print, but if the task is to render a terminal interface then the print becomes low level, opposite is also true, if you go down and your task is to put a character onto stdout, then the assembly code you’d write might be high level. What I mean to say is that, once you have defined the scope, then you can decide what level of knowledge to expect of the reader when looking at your code, from there, if some process feels fairly convoluted, but it doesn’t make sense to build an abstraction over it, then it is a good place to put a comment explaining why you did that, and, if it’s not really clear, even what that whole block does

What I usually do is I explain what the function does and, if not self explanatory, explain why it does such thing. Like, with the clock example, I’d explain that it tells the time and then, if not immediately obvious, explain why the time needs to be known… Smth like that.

There is no “correct” way of commenting code. I personally think the more verbose, the better, but that’s an unpopular opinion afaik. As long as the code can be understood, the comment is doing it’s job.

PS, I’m also kinda new to programming, mostly doing JS and React stuff

spoiler

I love putting memes in comments :P

Unless you’re writing something in the open source world, rarely does any code need comments at all.