My user account doesnt have sudo despite being in sudoers. I cant run new commands i have to execute the binary. Grub takes very long to load with “welcome to grub” message. I just wanted a stable distro as arch broke and currupted my external ssd
My user account doesnt have sudo despite being in sudoers. I cant run new commands i have to execute the binary. Grub takes very long to load with “welcome to grub” message. I just wanted a stable distro as arch broke and currupted my external ssd
Sorry i was using sh. This is the output
fsck: error 2 (No such file or directory) while executing fsck.ext2 for /dev/sdd1Ah, okay, that makes more sense.
On my system, looks like fsck.ext2 is a symlink to e2fsck, which is provided by the e2fsprogs package:
Can you try:
And then run:
Again?
E2fsprogs is installed already
rubs chin
Okay. “error 2 (No such file or directory)” is the error code that
perror()will print when it gets ENOENT.checks
One way you can get that is if you attempt to execute a file that isn’t there, or execute or open a symlink that has a target that’s missing. Could be that fsck.ext2 is missing or is a symlink, and that the
e2fsckbinary that it points to isn’t there.On my system, I get this:
Do you get something like that as well?
If they aren’t there, you can force reinstallation of e2fsprogs with
# apt install --reinstall e2fsprogsand if the files are missing, that should add them, but I don’t know how one could wind up in a situation where the package database thinks that the package is installed but that the binaries aren’t present on a fresh Debian install.I do have it
Okay, though I had an idea as to what should cause that, but no, not it. I deleted my response shortly after posting it, if you already saw it.
Hmm. Well, how about this. It should be possible to run e2fsck directly, and you say that the binary is present. Try:
If it says something about /dev/sdd1 being mounted, then don’t go ahead with the scan; you’ve got the wrong partition in that case.
Attempt to read block from filesystem resulted in short read while trying to open /dev/sdd1 Could this be a zero-length partition?
fsck is probably wrong in guessing that it’s a zero-length partition; I would be more-inclined to guess that a read error caused it not to be able to read anything.
That should display the partition table on the drive, as well as the lengths of the partition. My guess is that it’ll just show that you have a 4.5TB partition. Probably starts at something like 1MB and ends at something like 4500GB.
Linux was able to read from the drive enough to get at the partition table on it, or the
lsblkoutput you had above in that image wouldn’t be able to show the partition.But I’d guess that it’s hitting read errors in trying to read from the drive, and that the way that this is percolating up to fsck is fsck asking for N bytes and getting back only the bytes that it could read before it hit the error.
It’s maybe not impossible that an invalid partition table could produce that error. And maybe e2fsck is trying to read off the end of the device or something because the filesystem on the partition is messed up, but I’m biased towards to thinking that it’s more-likely that the drive is failing.
The first option I’m normally going to take when maybe a hard drive is dying is:
As long as the drive supports SMART, that’ll tell you whether the drive thinks that it’s failing. That won’t catch everything, but if the drive doesn’t give itself a clean bill of health, then I wouldn’t either.
If the kernel is trying to read data from a drive and seeing errors, it’ll probably show up in the kernel log.
Should show you errors in the kernel log from the current boot relating to that drive.
If you don’t see any errors there, then I’d be inclined to see whether it’s possible to read the contents of the partition and whether that can do so. Something like – and be very careful not to reverse the “of” (output file) and “if” (input file) parameters here, because
ddcan write to a drive and if typed incorrectly, this can overwrite your drive’s contents:That’ll just try reading from the beginning of the partition, giving you updates as it goes to let you know how much it’s read, and then just dump the data into /dev/null. If it fails to read data at some point, it should bail out. Probably don’t want to wait for the whole partition to be read, though, because 4.5TB is gonna take a while.
If dd can read the contents of the partition, then I assume that e2fsck should be able to as well.
The commands were fine but dd.
8192 bytes (8.2 kB, 8.0 KiB) copied, 21 s, 0.4 kB/s dd: error reading '/dev/sdd1': Input/output error 16+0 records in 16+0 records out 8192 bytes (8.2 kB, 8.0 KiB) copied, 28.0116 s, 0.3 kB/sdeleted by creator