Studio monitors are excellent choices, but expensive. I’ve used genelecs for pretty much every audio workstation I’ve ever done, I’m a huge fan, but you’re also talking $800 and up.

You can sometimes find a good deal on some used studio monitors, which to me is the way to go. A long ways back I decommissioned some genelecs for a studio (surprise surprise, the new studio had newer versions of the same model), and I’ve been using them since at home. Roughly 15 years now.

Ooh, missed that one - thanks!

Thanks!

Do you have any recs on good solarpunk movies/documentaries?

Fair enough. Most of my work means building out LXC’s and VMs for testing, and with 2 kids I don’t have much time/energy left for gaming, so my setup works for me.

But it’s definitely not for everyone, I already have the pieces in place to make it work nicely. I actually had a windows workstation set up for work, but couldn’t deal with the windows nonsense anymore, which is why I went this route.

It can work on a single machine with an iGPU, but kb/m gets a bit complex. And then there’s streaming over no machine or something, but that has its own drawbacks unfortunately.

Whatever works for you, works for you and that’s what matters

If it works for you, I’ve found running some things as a VM works better than dealing with windows.

Admittedly I have a lot of hardware due to what I do, but I’ve got (multiple, but just one is relevant in this case) proxmox server set up with an extremely tightened up windows 10 build. I’ve removed pretty much everything humanly possible on the windows side, just installing enough for the applications I need.

I then have a GPU that’s passed through to it directly (that machine is headless otherwise). So I’m getting all the GPU acceleration, but without using anything else on Windows, it stays slim and trim so it runs pretty well, and it’s pretty light on ram use.

With the second DP input of my monitor, I come off a video switcher but you can skip that and go right off the GPU. Now you’ve got a lightweight little VM directly connected to your display. Pass through your USB device of choice (I’m assuming a controller here, but you can use a second keyboard/mouse or USB host switch if you want).

Personally I find this approach easier since I don’t have to deal with all the memory gobbling nonsense on the windows side, I get to do my daily work in Linux, and specialty stuff that I just can’t run in wine stays readily available.

BMD bought Resolve maybe 15 years ago now, but the support is not limited to BMD hardware. It was more of a way for them to ensure BMD hardware support in a video editor at the time. Personally I have their web presenter and an older model of their TV studio kit at home (long story), but I also have a variety of other hardware, all of which works just fine with Resolve.

I’m using Resolve on the regular for my VHS conversions, though some tasks would be easier with the premium instead of the free version, I just fill in with ffmpeg or other tools and move on.

Just FYI, the download will ask for an email/name/etc, but the download starts right away, so you don’t need to actually give any PII out to get it.

They still sell laptops, desktops, and servers with Ubuntu pre installed.

I’ve used resolve for quite a few things in the past. It’s an excellent editor, way more than most people will need/use in the free version, and exceeds most corporate editing requirements in the paid version.

Blackmagic Design bought it to have a video editing suite they could tie to their hardware, which I would call similar in design approach. It’s inexpensive for what it does, works really well, but isn’t the top of the line for broadcast.

Most corporate broadcast (think like a bank or something having its own small recording studio, rather than the major broadcasting companies) will leverage BMD at some point in their workflow.

Considering the way they presented what was obviously them trying to skirt the rules, it isn’t hard to believe that CF did provide that info, and it just wasn’t presented in this writeup.

Not that I have any love for CF, just saying this is a case of no one being trustworthy.

Yep… It’s permanently where it’s at at purchase.

Which is fine, I don’t store anything on there (Jenkins automations to build, local git repo on another machine, output goes to NAS), but it’s ridiculous how much the upgrades cost.

If I didn’t need a build target for iOS I wouldn’t have bothered with it, that’s for sure.

Or a mini.

I have an M2 mini I use for iOS builds, cheap enough for me to buy and stick in the rack to use for remote builds. I got that a year ago for $600ish iirc.

Piper is probably what you want for the mouse (and maybe solaar which handles unifying receiver/bolt connectivity.

As far as Nvidia goes though, that’s likely to be the sticking point right now. Maybe at some point they will clean up their act, but I wouldn’t hold my breathe so I wouldn’t ask you to wait.

Windows 10 may be the better fit right now, and that’s ok. Maybe Nvidia will release new drivers in a few weeks or months and you’ll have more options, but for now I think Win10 may be the best fit for what you need.

Edit: Maybe see if Mint works out? https://lemmy.world/post/15653242

Honestly stencils are best for that.

Exactly - honestly would be neat to stick on the boxes for the controllers I’m using for sensors in the garden.

May play around a bit with the design (with the help of a few graphic designer folks that I work with and would enjoy this, who can also do in minutes what would probably take me an hour or two)

I like this a lot more vertically!

I also think it could have a bit less detail and get the point across, which would let it scale better.

I am shocked there is someone besides me who still enjoys the wordy C.

Pascal was the first real language I learned (after basic)

A few reasons:

• Any conversion (including internally at the display) can result in colorspace mismatches.
• If the sink has an unsupported mode, the source will send a default - which is usually a mismatch.

I wouldn’t call it often wrong, personally. I’d say some devices are really bad with EDIDs, and are consistently problematic. It’s more like -recent hardware is generally pretty good, but relying entirely on EDID won’t always work, so use with care.

Some great examples of problematic devices/situations (in general):

• Apple. Pretty much anything they make.
• DP to HDMI - while DP supports HDMI natively, that can be one of the situations where EDID issues crop up. But much less often than…
• DVI to HDMI or vice versa - this is probably the most problematic of general use. Happens somewhat often where a different or default colorspace gets used.

If you’ve got a single PC going to a display (or several), just set it once manually and you’re good to go. If you’re plugging and unplugging often with multiple devices (like with a dock), an EDID minder can be handy, but come with a price that generally makes setting it manually preferred anyway.

Hope this helps answer for you

It is a thing, it’s not a chore though. Usually it’s a talk about a cool project someone is involved with, sometimes guests from a major project give a talk.

And then snacks and chat after

Since the start. Forget working with them, it’s a rough go to even try and communicate with them.

And that goes back to mailing list days, creating a personal grudge against Gnome so firm that I haven’t used it since the early 2000s.

Thankfully there’s KDE for my general use and a wide variety of lightweight options for other uses.